Description
The Codan 5908 is the SSPA part of an 8 watt KU Band transceiver package. The complete Codan 8W KU-Band SSPA transceiver consists of an A/C power supply a dual up and down converter and this SSPA.
Although we have the other components necessary to make a full transceiver we do not have the cable set, and for this reason we offer components only.
Transceiver Transmit Data
| IF input | |
Frequency range
|
|
| Impedance | 50/75 Ω selectable |
| Connector | N female |
| Return loss | 18 dB minimum |
| Gain specification | |
Gain
|
|
| Attenuator range | 0 dB to 25 dB nominal |
| Attenuator step size | 1 dB nominal |
Gain flatness
|
|
| Gain stability | ±1.5 dB maximum, –40°C to +55°C |
| RF output | |
Frequency range
|
|
| Connector | WR75, PBR120 flange with M4 tapped holes |
| VSWR | 1.5:1 maximum |
| 8 WATT SSPA | |
| Output power (1 dB GCP) | +39.5 dBm (9 W) typical |
| +39.0 dBm (8 W) minimum | |
| Carrier to intermodulation | –26 dBc, two carriers each @ 6 dB |
| ratio | OPBO from 1 dB GCP |
| 16 WATT SSPA | |
| Output power (1 dB GCP) | +42.3 dBm (17 W) typical |
| +42.0 dBm (15.9 W) minimum | |
| Carrier to intermodulation | –25 dBc, two carriers each @ 6 dB |
| ratio | OPBO from 1 dB GCP |
| Spurious output | Meets EN 301 428 with 54 dBi antenna gain |
| Phase noise (SSB) | |
| 100 Hz | –60 dBc/Hz maximum |
| 1 kHz | –70 dBc/Hz maximum |
| 10 kHz | –75 dBc/Hz maximum |
| 100 kHz | –85 dBc/Hz maximum |
| Synthesiser step size | 1 MHz |
Looking for other SSPA components? Check out our website: SSPA Search Results
