Nissan UD 2600 C-Band Uplink Truck

$35,200.00


Description

Nissan UD 2600 C-Band Uplink Truck is a 2006 vehicle in excellent condition with 217,000 miles on the odometer. This truck can be sold complete with the electronic package shown below for $44,650 or…..$35,200 rack ready (read down for details.)

Unit R-1   _ C Band Uplink Truck

2006 Nissan UD 2600, Extended Cab – 217,450 miles
– Well maintained with good tires and paint
–Marathon  Body, custom built insulated box with (2) 17,500 BTU Air Conditioners
– 230 HP Hino engine with engine break
– 25,950 GVW (no special license required)
– Allison Automatic Transmission

Power

-MQ  Whisperwatt  – 45 Kva  diesel generator
-Apollo Power Panel with Shore and Generator Metering and Switching
-150’ Power Cable

Antenna

-(1) Comtech 5.5 meter Antenna with 3 port feedhorn.

Electronics
-(2) Comtech UT-4505 C Band Upconverters
-(2) Tandberg SM5600 Modulators
-(2) Tandberg E5782 HD/SD 4:2:2 & 4:2:0 Encoders  – 8 Audios – BISS Encryption
-(1) Tandberg RX 1290 HD/SD RX/Decoder  with BISS decryption – DVBS/DVBS2 –                        QPSK/8PSK – 8 Audios
-(1) Standard  Global Analog Video/Audio Receiver
-(1) 17” Plura PBM-217S  17” Multiformat HD/SD SDI Monitor with 16 Channel Audio metering,   video measurement and SDI audio de-embedding
-(1) Marshall V-R653P-HD  Triple 5” HD SDI Monitors
-(1) Avcom PSA 37D Spectrum Analyzer
-(2) Varian/CPI GEN III C Band Amplifiers
-(1) Hubcom 1:1 Amplifier Switch System
-(2) Miranda / Densite HD SDI 1×4 video distribution amplifiers with dual power supply tray
-(4) Grass Valley Stereo 1X6 analog audio distribution amplifiers with dual power supply tray
-(1) Videotek VTM 4100 HD/SD Video/16 Ch. Audio Measurement and De-Embedder to AES      audio
-(1) Wohler VMDA-4  Multi Input  AES Audio Meter / Monitor
-(1) Crown D-75 Stereo Speaker amplifier
-(1) RTS-MCE 325 2 Channel Base Station with attached speaker
-(2) ADC HS SDI Video Patch Bays
-(3) Bittree Analog Audio Patch Bays
-(1) Tool Kit

Rack Ready Plus… $35,200

No electronics, but we will include the two CPI C Band amplifiers and waveguide switch/dummy load system