Satellite Systems Corp 3430 Beacon Receiver is an L-Band receiver, it is a used product but has been tested and is guaranteed unconditionally to work upon arrival.
Ethernet connectivity with M&C control interface, and power up temperature compensation for rapid signal acquisition. Frequency selection on 10 kHz steps may be accomplished from the
front panel or via remote control. Pre-detection noise bandwidth of 50 kHz (or factory option of 25 kHz) facilitates accurate tracking at very low C/N levels.
Wide bandwidth, 930 to 1700 MHz standard
Digital level reference setting, -40 to -100 dBm on 0.5 dB steps
Ethernet connectivity with M&C control interface
M&C control interface allows for remote monitoring from one or multiple locations
RS-232/422/485 and Ethernet all Standard
Temperature stabilization compensation.
The output of the Beacon Receiver is a DC voltage proportional to the input signal level to facilitate both antenna tracking control and automatic power control. A Loss of Carrier indicator is provided in the event the tracking signal is lost. Form “C” relay contacts provide an external Loss of Carrier Alarm. A front panel VFD or SSC GUI (via your computer) displays operating frequency, relative signal level, carrier lock or alarm, and input level.