Description

Paradise RCP2-1100 Redundant System Controller is a used controller without cables.

It was removed from an outside broadcast truck. Frequently the owners of these vehicles cannot spend the time removing the cables and just cut them off. This is what happened in this case.

Complete testing is not possible as a result of the missing cable set, but like always our guarantee will stand behind the product.

We have a soft copy manual that I will send it you email a request.

Here is some information taken from the datasheet:

Description:
The Teledyne Paradise Datacom family of Redundant System Controllers is used to monitor and control amplifiers configured in 1:1 and 1:2 redundant systems.

The RCP2-1100 and FPRC-1100 controllers provide control of two amplifiers and their corresponding transfer switch. The RCP2-1200 and FPRC-1200 controllers monitor and control
three amplifiers and two switches.

The RCP2/FPRC Series of redundant controller can be used in LNA, LNB, and SSPA systems as well as frequency converter systems. They feature a full mimic panel and menu-driven Vacuum Fluorescent Display all in one rack unit of cabinet space. Front panel fault lights and an audible alarm are available for fault detection.

Completely redundant power supplies are incorporated with universal input and power factor correction. System control is available through the front panel (local mode), or through the
rear panel parallel I/O remote, or serial I/O remote modes. The use of flash memory allows easy field programmable and firmware updating.